5 Series E39 540i (M62) TOUR
Note:
At this point, do not install special tool 11 0 211 (support
board) in special tool 11 1 065.
Caution!
Do not damage sealing surface.
If necessary, cover special tool 11 1 065 with plastic
sheeting.
Fit cylinder head on special tool 11 1 065 and secure with two
cylinder head screws.
Remove camshafts. This task is described in the section
"Removing left/right camshafts",
refer to 11 31 011 / 11 31 015.
Remove all valve springs,
refer to 11 34 715.
Remove all valve stem seals,
refer to 11 34 560.
Remove all valves,
refer to 11 34 552.
RA Dismantling and reassembling cylinder head (M62)
BMW AG - TIS
20.02.2013 12:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
