5 Series E39 540i (M62) TOUR
Insert and tighten down guide rail screw.
Align angle bracket (2) so that it snaps into place in guide on
cylinder head.
Note:
The grub screw (1) is secured with a plastic coating and
locates the angle bracket (2) in place in the cylinder head.
Insert new grub screw (1) only until it makes contact with angle
bracket (2) without play; do not tighten down.
Caution!
Do not damage the cylinder head.
Rotate camshafts until camshaft markings face upwards.
Align camshafts.
Fit special tool 11 2 446 / 442 to camshafts on cylinder bank
5 to 8.
RA Removing and installing left cylinder head (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
