5 Series E39 540i (M62) TOUR
Removal
Removal of cylinder head is described separately from installation.
Assembly sequence for removal and installation is different.
Crank engine at central bolt in direction of rotation until the first
cylinder is in TDC position.
Unfasten the accessible three screws on exhaust and inlet
camshafts on cylinder bank 5 to 8 approx. 1/2 a turn.
Crank engine once enginewise up to TDC position of first cylinder.
RA Removing and installing right cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 12:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -