5 Series E39 540i (M62) TOUR
Version 2
(acoustic cover with press-stud fastener)
Open press-studs (1 ... 4) one at a time, at the same time lifting
the acoustic cover slightly. Once all four press-studs have been
opened, remove the acoustic cover.
Installation:
Position acoustic cover and press downwards until press-
studs (1 ... 4) click into place.
Remove suction-filter housing with air-mass sensor,
refer to 13 71 000
Unfasten dipstick guide from right timing case cover.
Unfasten top left and right nuts on engine mount.
RA Removing and installing/replacing upper section of oil pan (M62)
BMW AG - TIS
20.02.2013 12:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -