5 Series E39 540i (M62) TOUR
11 21 500
Replacing crankshaft (M62)
(engine removed)
Unscrew oil sump.
Remove oil pump.
Remove timing case cover at bottom,
refer to 11 14 110.
Remove piston,
refer to 11 25 530.
Remove flywheel,
refer to 11 22 500 / 11 22 510.
Remove rear end cover. This task is described in the section
Replacing crankshaft radial seal,
refer to 11 14 151.
Unfasten taper screw mount on main bearing. (Collar screws and
spacer screws.)
Remove screws securing main bearing caps.
RA Replacing crankshaft (M62)
BMW AG - TIS
20.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -