5 Series E39 540i (M62) TOUR
11 23 010
Removing and installing/replacing vibration
damper (M62)
Unscrew and remove splash guard.
Remove alternator drive belt,
refer to 11 28 010
Remove drive belt for a/c compressor,
refer to 11 28 050
Release screws and remove vibration damper.
Installation:
The vibration damper is located with a dowel pin. Replace
screws.
Tightening torque,
refer to Technical Data 11 23 3AZ
RA Removing and installing/replacing vibration damper (M62)
BMW AG - TIS
20.02.2013 12:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -