bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Replacing Left Knock Sensors (cylinder Bank 5 To 8) (M60, M62)|Page 943 > < 4 RA Replacing Right Knock Sensors (cylinder Bank 1 To 4) (M60, M62)|Page 941
Page 1
background image

12 14 611

Replacing left knock sensors (cylinder bank 5
to 8) (M60, M62)

Interrogate fault memory of DME control unit.

Switch off ignition.

Disconnect intake air manifold,

refer to 11 61 050.

Caution!

Mixing up the knock sensor plug connections will result in
engine damage!

The wiring and plug connections must correspond to the
original routing. This eliminates the risk of mix-ups.

Knock sensor (3) monitors combustion in cylinders 5 and 6.

Knock sensor (4) monitors combustion in cylinders 7 and 8.

RA  Replacing left knock sensors (cylinder bank 5 to 8) (M60, M62)

BMW AG - TIS

20.02.2013  14:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Replacing Left Knock Sensors (cylinder Bank 5 To 8) (M60, M62)|Page 943 > < 4 RA Replacing Right Knock Sensors (cylinder Bank 1 To 4) (M60, M62)|Page 941