5 Series E39 540i (M62) TOUR
Remove bracket for oil lines from the power steering pump.
Place oil drip tray under engine.
Unfasten banjo bolt (1) (inlet) and remove oil line.
Installation:
Replace sealing rings.
Tightening torque,
refer to Technical Data 24 31 4AZ.
Unfasten cap screw (2) (return) and pull off oil line.
Move both oil lines to the left side.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 24 31 4AZ.
Support transmission with special tool 00 2 030 / 24 5 301 /
24 0 250.
RA Removing and installing automatic transmission (A5S 440Z)
BMW AG - TIS
20.02.2013 16:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -