5 Series E39 540i (M62) TOUR
24 10 003
Removing and installing/replacing position
switch (A5S 440Z)
Remove rear underbody protection from assemblies.
Remove left and right heat shield.
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Pry out retaining plate with a screwdriver. Remove cable (2).
RA Removing and installing/replacing position switch (A5S 440Z)
BMW AG - TIS
20.02.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
