5 Series E39 540i (M62) TOUR
Unfasten nut.
If necessary, expand the swivel bearing with special
tool 31 2 200 and press downwards.
Installation:
Press swivel bearing up to stop and note the mark indicating
the installation position.
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 21 4AZ.
Unfasten nut on front axle support/swivel bearing.
Installation:
Use washer (1).
Replace self-locking nuts.
Tightening Torque, if necessary brace on hex cap nut,
refer to Technical Data 31 12 2AZ / 6AZ.
Press control arm off swivel bearing with special tool 31 2 240.
Installation:
Tapered spigot and bore both free of grease.
RA Replacing left or right control arm (high)
BMW AG - TIS
20.02.2013 16:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
