5 Series E39 540i (M62) TOUR
Clamp special tool 31 3 341 at guide (1) in vise.
Important!
Locking pins (2) must be felt and heard snapping into place.
Check seating of spring holders 31 3 352.
Warning!
Prior to each use, check special tools for functional capability.
Do not use damaged tools.
Do not make any modifications.
Use only suitable spring retainers.
The special tools are solely intended for tensioning and
relieving the tension on springs.
Never tighten or untighten special tool 31 3 341 with an
impact screwdriver.
Spring retainers must each be inserted from chamfer (1) of special
tool 31 3 341.
Locking pins must be felt and heard snapping into place. Check
seating of spring retainers again.
Position coil spring between spring holders so that
1. lower spring end (1) aligns with end (2) of spring holder;
2. 3 coils lie between spring holders.
RA Replacing front left or right spring strut shock absorber (high)
BMW AG - TIS
20.02.2013 16:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
