5 Series E39 540i (M62) TOUR
33 33 101
Replacing two rubber mounts for rear axle
carrier (touring)
Caution!
Vehicle with air suspension:
Pull retainer off air supply unit to ensure that accidental
feedback control of the system cannot occur.
Loosen pipes on distributor block to release system pressure. The
vehicle stands low.
Installation:
Tightening Torque,
refer to Technical Data 37 12 3AZ.
Unfasten exhaust system from rear support.
Unfasten handbrake Bowden cable from brackets.
If necessary, remove connector from ride height sensor.
Remove wheels.
Raise wheel carrier with workshop hoist.
Unfasten bolt on wheel carrier.
RA Replacing two rubber mounts for rear axle carrier (touring)
BMW AG - TIS
20.02.2013 18:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
