5 Series E39 540i (M62) TOUR
34 52 545
Removing and installing/replacing
transversal-acceleration sensor DSC3 up to
09/98
Note:
After replacing lateral acceleration sensor, carry out an
adjustment with DIS (Diagnosis Information System) under
menu point "Service functions".
Removing driver's seat,
Standard seat, refer to 52 14 000
Comfort seat, refer to 52 17 000
Sports seat, refer to 52 16 000
Removing lower left door pillar trim,
refer to 51 43 150
Lift floor trim panel (1) and fold to side.
Release plug connector (2) and pull off connector.
Unfasten screws (3) and remove acceleration sensor.
Installation:
Ensure proper locking of plug connector.
RA Removing and installing/replacing transversal-acceleration sensor DSC3 up to 09/
BMW AG - TIS
20.02.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -