bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Adjusting Trunk Lid To Fit (touring)|Page 2264 > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2262
Page 3
background image

This figure displays the side view of the eccentric pin in the lower
section of the trunk lid lock

1 = upper dead center

Trunk lid lock - upper section unlocked

2 = lower dead center

Trunk lid lock - upper section locked

Unfasten plug connection to actuator motor for the eccentric pin in
the lower section of the trunk lid lock from the bracket.

Caution!

Eccentric pin in lower section of trunk lid lock must be at lower
dead center.

Caution!

After disconnecting plug connector from actuator motor, trunk
lid is opened by electric unlocking fixture of upper section of
trunk lid lock.

For this reason, the cable connections to the upper section of
the trunk lid lock must remain in place since otherwise the
trunk lid can only be opened by the emergency handle.

Eccentric pin of lower section of trunk lid lock remains at
bottom dead center point after unlocking.

Unfasten plug connection to actuator motor by pressing down both
lugs, then pull apart.

RA  Adjusting trunk lid to fit (touring)

BMW AG - TIS

20.02.2013  20:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

1 RA Adjusting Trunk Lid To Fit (touring)|Page 2264 > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2262