5 Series E39 540i (M62) TOUR
Unfasten bolt from right top belt.
Installation:
Mounting bracket (2) of right top belt must contact threaded pin (1)
during installation for proper positioning.
Caution!
Make sure webbing does not rub anywhere!
Tightening Torque,
refer to Technical Data 72 11 1AZ
Unfasten bolts (1) of reversing clip.
Installation:
Tightening Torque,
refer to Technical Data 72 11 1AZ
Left only:
Unfasten screws (2) of belt relief fitting and remove belt relief
fitting.
Installation:
Tightening Torque,
refer to Technical Data 72 11 7AZ
Installation summary for reversing clip:
1.
Top bolt
2.
Washer for top bolt
3.
Reversing clip
4.
Washer for bottom bolt
5.
Bottom bolt
Note:
The reversing clip is provided with an identification mark for the
installation location,
L = Left
R = Right.
RA Removing and installing/replacing left or right rear safety belt
BMW AG - TIS
21.02.2013 03:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -