bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 SI Introduction Of New Fuel Filler Caps For US Models E36 Z3 E38 E39 E46 US Only > < 1 SI Master Document For Emissions Test Nominal Values All Series Up To 2003
Page 1
background image

VS-21/Tikkanen

Baugruppe/Group: 12

12 02 99 (450)

weltweit 
außer
USA/Kanada

06/1999

Starter races without DME relay

E39 / S62 / M5

Complaint: 

If the master relay is removed or defective, the DME control unit will actuate the starter
motor as soon as the ignition is turned on, as if the starter switch were activated.

Effect: 
The vehicle does not start but can actively move if a gear is engaged. 
The operation of the immobilizer is not bypassed. Fuel injection is not active as there is no
voltage in the master relay.

Cause: 

Software error in the DME program.

Affected
vehicles:

E39 S62 M5 
Manufacturing period: Start of series production up to July 1999

Procedure:

Inform the service department of the situation.

Service reprogramming during next visit to the workshop, new program status for service
from BMW CD-ROM V19.0 (from September 1999). 
More precise information to follow.

Series production updated to new program status.

SI  Starter races without DME relay E39 S62 M5

BMW AG - TIS

21.02.2013  03:27

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 SI Introduction Of New Fuel Filler Caps For US Models E36 Z3 E38 E39 E46 US Only > < 1 SI Master Document For Emissions Test Nominal Values All Series Up To 2003