5 Series E39 M5 (S62) SAL
11 00 050
Removing and installing engine (S62)
Instructions for disconnecting and connecting battery,
refer to General Information MG12.
Remove battery negative lead from battery and cover.
Moving engine hood into assembly position:
Note:
The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.
Hold engine bonnet/hood.
Raise clamps (1) on both sides and slide upwards.
Unhook dampers (2) on left and right from engine hood.
Raise engine bonnet/hood.
Insert M8 screw (1) in engine hood hinges (2) on left and right
for fastening.
Release retaining clips (1).
Caution!
The air duct can brake at the firewall if not carefully removed
and installed.
Carefully turn air duct (2) upwards so that it is no longer locked in
firewall. Pull air duct (2) forwards and lift out.
RA Removing and installing engine (S62)
BMW AG - TIS
21.02.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
