bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Left Cylinder Head (S62)|Page 569 > < 3 RA Removing And Installing Left Cylinder Head (S62)|Page 567
Page 3
background image

Removal

Removal of cylinder head is described separately from installation.

Note:

Cylinder head bolts on cylinder 8 are only accessible after signal
rings have been removed.

Caution!

Risk of damage to pulse generators (2).

Remove pulse generator (2) of exhaust and inlet camshafts
or release screws (1) with a long socket.

Grip camshaft at hexagon head and release banjo bolt (1).

Remove signal rings.

When the engine is switched off, VANOS moves the camshafts to
a position which is advantageous to engine starting.

Caution!

Before the VANOS adjustment unit is removed, the camshafts
on cylinder bank 5 to 8 must be rotated back to their initial
position.

RA  Removing and installing left cylinder head (S62)

BMW AG - TIS

21.02.2013  06:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

3 RA Removing And Installing Left Cylinder Head (S62)|Page 569 > < 3 RA Removing And Installing Left Cylinder Head (S62)|Page 567