5 Series E39 M5 (S62) SAL
Note:
At this point, do not yet install special tool 11 0 211 (support
board) in special tool 11 1 065.
Remove throttle assembly.
Caution!
The work step Removing and installing throttle assembly
contains important tips on installing the pull rods and the
throttles,
refer to 13 54 030.
Unfasten screws.
Remove water pipe (1).
Installation:
Replace gaskets (1).
RA Dismantling and reassembling cylinder head (S62)
BMW AG - TIS
21.02.2013 06:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
