5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Grip camshaft at hexagon head and release banjo bolt (1).
Remove signal rings.
Cylinder bank 5 to 8:
Caution!
Risk of damage to pulse generators (2).
Remove pulse generator (2) of exhaust and inlet camshafts or
release screws (1) with a long socket.
Cylinder bank 5 to 8:
Grip camshaft at hexagon head and release banjo bolt (1).
Remove signal rings.
When the engine is switched off, VANOS moves the camshafts to
a position which is advantageous to engine starting.
Caution!
Before the VANOS adjustment unit is removed, the camshafts
on both cylinder banks must be rotated back to their initial
position.
RA Removing and installing both cylinder heads (S62)
BMW AG - TIS
21.02.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -