5 Series E39 M5 (S62) SAL
11 28 010
Replacing alternator drive belt (S62)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Remove fan clutch with impeller,
refer to 11 52 020.
Remove engine splash guard.
Tighten screw connection (1) of tensioning wheel and compress
belt tensioner slowly and carefully. Hold belt tensioner under
tension, remove drive belt.
Caution!
Drive belt must be replaced if contaminated with hydraulic
fluid.
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Installation:
Check that belt is correctly positioned on belt pulleys.
RA Replacing alternator drive belt (S62)
BMW AG - TIS
21.02.2013 07:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -