5 Series E39 M5 (S62) SAL
Remove oil lines (1) from cylinder head on cylinder
banks 1 to 4 and 5 to 8.
Note:
The oil lines (1) of cylinder banks 1 to 4 and 5 to 8 are
different.
Cylinder bank 1 to 4:
Remove oil line from VANOS adjustment unit.
Installation:
Replace sealing rings.
Attach oil line to VANOS adjustment unit.
Tightening Torque,
refer to Technical Data 11 36 9AZ.
Cylinder bank 1 to 4:
Fit special tool 11 7 130 to VANOS adjustment unit.
Connect up compressed air (2 to 8 bar).
Cylinder bank 1 to 4:
Disconnect plug connection for solenoid valves on cylinder
bank 1 to 4.
Connect special tool 12 6 050 in conjunction with special
tool 12 6 411 (from special tool kit 12 6 410) to solenoid
valves on cylinder bank 1 to 4. Connect special
tool 12 6 411 to correct terminals on car battery.
Alternately press toggle switch buttons 1 and 2 several times on
special tool 12 6 050.
RA Checking camshaft timing (S62)
BMW AG - TIS
21.02.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -