5 Series E39 M5 (S62) SAL
11 31 505
Adjusting camshaft timing (S62)
(Refer to operation no. 11 31 005)
Caution!
When the engine is switched off, VANOS moves the
camshafts to a position which is advantageous to engine
starting.
The camshafts must "not" be adjusted in this position.
The camshafts must be rotated back to their initial position
beforehand and the camshaft timing checked,
refer to 11 31 005.
Remove special tool 11 2 300. Rotate crankshaft in direction of
rotation a further revolution up to overlap TDC position.
Cylinder bank 1 to 4:
Slacken six accessible bolts 1/4 turns.
RA Adjusting camshaft timing (S62)
BMW AG - TIS
21.02.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
