5 Series E39 M5 (S62) SAL
Remove oil lines (1) from cylinder head on cylinder
banks 1 to 4 and 5 to 8.
Note:
The oil lines (1) of cylinder banks 1 to 4 and 5 to 8 are
different.
Removal:
Removal of the VANOS adjustment unit and the VANOS gear is
described separately from installation. The assembly sequence for
removal and installation is different.
When the engine is switched off, VANOS moves the camshafts to
a position which is advantageous to engine starting.
Caution!
Before the VANOS adjustment unit is removed, the camshafts
on cylinder bank 5 to 8 must be rotated back to their initial
position.
Rotate crankshaft in direction of rotation as far as ignition TDC
position of cylinder 1. Secure vibration damper in position with
special tool 11 2 300 .
RA Removing and installing/replacing left VANOS gear (S62)
BMW AG - TIS
21.02.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -