5 Series E39 M5 (S62) SAL
13 53 240
Replacing complete injection pipe (S62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Remove intake air manifold.
Disconnect plug connections (1).
Unclip cable (2) from cable guides.
Disconnect plug connections (1).
Unclip cable (2) from cable guide.
Disconnect plug connection for throttle actuator (1), idle speed
control valve (2) and electric changeover valve (3).
RA Replacing complete injection pipe (S62)
BMW AG - TIS
21.02.2013 16:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -