5 Series E39 M5 (S62) SAL
If measurement (A) > 24.2 mm
±
0.5 mm, shorten pull rod of
cylinder bank 5-8 by turning hexagon (1) until
measurement (A) = 24.2 mm
±
0.5 mm is achieved at all
throttles 5-8.
Screw in stop screw (1) until front end of screw rests on stop lug.
Activate servomotor at specified value 0 %.
Synchronizing cylinder banks with each other:
Position adjustable pull rod (1) of cylinder bank 1-4 on
servomotor side on ball head.
Turn hexagon to adjust length of pull rod (1) so that ball socket is
aligned centrally to ball head.
Note:
Do not clip in pull rod (1) yet.
Force off adjustable pull rod (2) of cylinder bank 5-8 on
servomotor side.
Position dial gauge plates on throttle body of cylinders 2 and 3 and
throttle body of cylinders 6 and 7. Mount dial gauges in dial
gauge plate supports for measuring at throttle bodies 3 and 6.
RA Supplementary work for basic throttle setting (S62)
BMW AG - TIS
21.02.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -