5 Series E39 M5 (S62) SAL
Disconnect plug connection (1) on throttle potentiometer.
Unfasten hose clip (1) and remove hose.
Pull off vacuum hose (2).
Unhook pull rods (1) at ball heads on servomotor side.
Release screws (2).
Remove injection pipe (3) together with injector valves towards
top.
Installation:
Check O-rings on fuel injectors, replace if necessary.
Coat O-rings with anti-friction rubber coating (e.g. petroleum
jelly).
Remove and install sealing flange for intake air manifold,
refer to 11 61 056.
Installation:
Adjust throttle basic setting,
refer to 13 54 010.
RA Removing and installing/replacing throttle body (S62)
BMW AG - TIS
21.02.2013 16:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -