5 Series E39 M5 (S62) SAL
13 54 250
Replacing intake hose (between air-mass flow
sensor and manifold) (S62)
Note:
The removal and installation of the left intake hose is
described in the following text. The same procedure applies
to the removal and installation of the right intake hose.
Release hose clamps (1).
Unclip cable of air-mass flow sensor from cable holders (2).
Remove intake hose (3).
Installation:
Replace hose clips.
Check sealing ring (1) on intake air manifold for seating and
damage and replace if necessary.
Installation:
To aid installation, apply a thin coat of petroleum jelly to
sealing ring (1).
Check sealing ring (1) on intake hose for seating and damage
and replace if necessary.
Installation:
To aid installation, apply a thin coat of petroleum jelly to
sealing ring (1).
RA Replacing intake hose (between air-mass flow sensor and manifold) (S62)
BMW AG - TIS
21.02.2013 16:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -