bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Radiator (S62)|Page 1461 > < 1 RA Checking Cooling System For Water Leaks|Page 1458
Page 1
background image

17 11 000

Removing and installing radiator (S62)

Important!

Danger of scalding!

Only perform this work after engine has cooled down.

Drain coolant,

refer to 17 00 005 .

Remove and install coolant expansion tank,

refer to 17 11 100 .

Remove fan cowl,

refer to 17 11 031 .

Lift out spring (1).

Disconnect water hose (2).

Release left and right screws (3) on radiator.

Remove both brackets (4).

Installation:

Slide back spring (1).

Water hose (2) must snap audibly into place.

Pull off plug (1).

Lift out spring (2).

Disconnect water hose (3).

Installation:

Slide back spring (2).

Water hose (3) must snap audibly into place.

RA  Removing and installing radiator (S62)

BMW AG - TIS

21.02.2013  20:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Radiator (S62)|Page 1461 > < 1 RA Checking Cooling System For Water Leaks|Page 1458