5 Series E39 M5 (S62) SAL
Caution!
Do not let propeller shaft fall into joints.
Joints and rubber sleeve can be damaged on constant-
velocity joint.
Bend propeller shaft downwards at center bearing, remove from
transmission output flange and tie back to one side.
Lift out retainer (4).
Pull selector rod out of joint and remove washers (5).
Installation:
Grease selector rod.
Grease,
refer to BMW Service Operating Fluids.
Remove retaining clip with a screwdriver.
RA Removing and installing transmission (S6S 420G)
BMW AG - TIS
21.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
