5 Series E39 M5 (S62) SAL
31 35 000
Removing and installing/replacing front
stabilizer (high)
Unscrew and remove splash guard.
Secure engine in installation position with special tool and
unfasten left and right engine mounts at top of engine
support arm, refer to MG 11.
Remove left and right wheels.
Unfasten nut.
Press off track rod on pitman arm with special tool 32 1 190.
Installation:
Tapered spigot and bore free of grease; replace self-locking
nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
Remove idler arm
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 32 21 7AZ.
Unscrew left and right nuts.
Press left and right track rod off steering knuckle with special tool
31 2 240.
Installation:
Use washer (1).
Replace self-locking nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
RA Removing and installing/replacing front stabilizer (high)
BMW AG - TIS
21.02.2013 21:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
