5 Series E39 M5 (S62) SAL
Unfasten screws.
Installation:
Replace screws (microencapsulation).
Tightening torque, refer to Technical Data 52 10 6AZ
Remove spring by pressing down with large screwdriver and pull
off left / right tapers (1). Remove seat rails from seat frame.
Unfasten screws and pull seat rails backwards to remove from
seat frame.
Installation:
Replace screws (microencapsulation).
Tightening torque, refer to Technical Data 52 10 6AZ
Only replace:
Lift out left / right interlock and remove unlocking linkage.
If necessary, replace rubber tape (1).
RA Removing and installing / replacing both seat rails on left or right front seat
BMW AG - TIS
22.02.2013 02:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -