5 Series E39 M5 (S62) SAL
65 75 570
Removing and installing/replacing control
unit for radio interior protection
Unclip and remove cover.
Unfasten screws and allow control unit to hang down.
Important!
The old control unit can be installed without the shield plate.
The shield plate provided must always be installed.
Pull off connector and thread out cable.
RA Removing and installing/replacing control unit for radio interior protection
BMW AG - TIS
22.02.2013 06:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -