5 Series E60 520d (N47) SAL
Important!
Belt tensioner is under spring pressure.
Press belt tensioner (1) back in direction of arrow.
Remove drive belt.
Pretension belt tensioner (1).
Both bore holes, see arrow, must be flush.
Increase pretension on tensioning pulley (1) with tool (2) until
special tool 11 3 340 can be positioned on tensioning
pulley (1).
Remove drive belt.
Installation:
Fit drive belt with flocked side facing inwards.
Assemble engine.
RA Removing and installing/replacing alternator drive belt (N47, N47S)
BMW AG - TIS
23.01.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
