5 Series E60 520d (N47) SAL
13 53 170
Removing and installing/replacing all
pressure lines to injectors (N47)
Special tools required:
•
37 1 152
Read out fault memory of DDE control unit. Turn off
ignition.
Layout of common rail system N47
Remove and install acoustic cover
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
RA Removing and installing/replacing all pressure lines to injectors (N47)
BMW AG - TIS
23.01.2013 17:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
