5 Series E60 520d (N47) SAL
Cut rear muffler with special tool 00 2 210 at marked point and
deburr with standard tools.
Unscrew nuts.
Tightening torque 18 20 4AZ
.
Unscrew nuts.
Lower rear muffler and remove.
Installation:
Connect rear muffler to centre muffler by means of clamping
sleeves.
Align rear muffler to rear apron.
Align clamp and tighten down.
RA Removing and installing/replacing rear muffler (N47)
BMW AG - TIS
23.01.2013 17:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
