5 Series E60 520d (N47) SAL
18 40 040
Removing and installing, sealing or replacing
exhaust manifold (N47)
Necessary preliminary tasks:
Remove exhaust turbocharger
Release bolts (1).
Tightening torque, 11 71 1AZ
.
Note:
The exhaust turbocharger is removed for clearer illustration.
Release nuts (1), remove exhaust manifold (3) from cylinder head.
Installation:
Tightening torque: 11 62 1AZ
Clean connection points and fit new seals.
Important!
Manifold gaskets are graphite-coated on one side!
The graphite coating must be fitted on the manifold side.
RA Removing and installing, sealing or replacing exhaust manifold (N47)
BMW AG - TIS
23.01.2013 17:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
