5 Series E60 520d (N47) SAL
Lower engine towards rear and lock with workshop lifter.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
•
Unlock plug (1) by turning and disconnect
•
Do not touch pins
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Detach holder from transmission fluid lines on oil sump.
RA Removing and installing automatic transmission (6HP19Z) N47
BMW AG - TIS
23.01.2013 18:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
