5 Series E60 520d (N47) SAL
32 41 060
Removing and installing (replacing) vane
pump for power steering (N47)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove belt pulley
•
Remove front underbody protection
Release hose clamp (1) and detach suction line (2) from vane
pump.
Installation:
Markings (3) on suction line and vane pump connection must
match up.
Release banjo bolt (5) and detach pressure line (4) from vane
pump.
Installation:
RA Removing and installing (replacing) vane pump for power steering (N47)
BMW AG - TIS
23.01.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -