5 Series E60 520d (N47) SAL
35 31 000
Removing and installing / replacing clutch
pedal
Necessary preliminary tasks:
•
Remove pedal trim.
•
Remove CAS control unit
Check function after completing tasks.
Disconnect return spring (1).
Unclip fastener (2).
Pull out pin (3).
If necessary, disconnect over-center helper spring.
Press hook (1) together and pull out pin.
Installation:
Replace pin.
Remove clutch pedal.
RA Removing and installing / replacing clutch pedal
BMW AG - TIS
23.01.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
