5 Series E60 520d (N47) SAL
61 12 210
Replacing wiring harness in left or right rear
door (long version)
Necessary preliminary tasks:
•
Close rear side window completely
•
Disconnect battery negative lead
•
Remove rear door trim panel
•
Remove sound insulation in rear door
Disconnect plug connection (1).
Disconnect door wiring harness (2) at retainer (3).
Installation:
Make sure door wiring harness (2) is correctly laid.
Note:
For clearer illustration, shown with front door removed.
Release screw (1), fold door wiring harness plug on B-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) in direction of arrow out of rear door (4).
Feed out door wiring harness towards front to B-pillar and remove.
RA Replacing wiring harness in left or right rear door (long version)
BMW AG - TIS
24.01.2013 00:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -