5 Series E60 520d (N47) SAL
Removal and installation:
Note:
To facilitate installation/removal of control unit, move seat
upwards fully.
Unlock and disconnect all plug connections in area (1).
Unlock catches (2) towards rear, feed out control unit for seat
adjustment (3) in direction of arrow and remove from seat
rail (4).
Installation:
Make sure mounts (1) and retaining lugs (2) of control unit for
seat adjustment (3) are correctly seated.
Replacement:
Remove trim for top rail on outside.
Unlock central seat connector (1) and disconnect.
Unlock and disconnect all plug connections from connector
strips (2).
Pull seat pan (1) forwards slightly and unclip from seat linkage.
Lift seat pan at rear left and right out of seat rail.
RA Removing and installing (replacing) control unit for left or right seat adjustme
BMW AG - TIS
24.01.2013 01:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -