5 Series E60 520d (N47) SAL
11 12 Cylinder Head with Cover
Type
Thread
Tightening specification
Measure
1AZ Cylinder head bolts
(steel bolt)
N47 / N47S
M12x1.5
L204.5
Replace screws
Tighten bolts from middle
in diagonal sequence in
outward direction.
1. Jointing torque
70 Nm
2. Release all bolts min.
180
°
from outside inwards
3. Jointing torque
50 Nm
4. Angle of rotation
120
°
5. Angle of rotation
120
°
2AZ Chain tensioner, top
N47 / N47S
M22x1.5
Replace screws
70 Nm
3AZ Guide rail to cylinder head
N47 / N47S
M16x1.5
Bearing pin
20 Nm
AZD Cylinder Head with Cover
BMW AG - TIS
24.01.2013 05:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -