5 Series E60 520i (M54) SAL
Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
Release screws and remove vane pump.
Tightening torque 32 41 1AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing/replacing vane pump for power steering (M54)
BMW AG - TIS
24.01.2013 18:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
