5 Series E60 523Li (N52) SAL
Reach into trim (1) and unclip upwards from retainers (2).
Feed out trim (1) upwards over gaiter (3), disconnect associated
plug connection and remove trim (1).
Installation:
Make sure retainers (1) are correctly seated in associated
mountings of trim (2).
Replacement:
If necessary, remove driving dynamics switch.
RA Removing and installing/replacing trim for preselector lever (from 03/2007)
BMW AG - TIS
06.02.2013 00:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -