5 Series E60 523Li (N52) SAL
51 42 060
Removing and installing/replacing armrest on
rear left or right door trim panel (up to
03/2007)
Necessary preliminary tasks:
•
Remove rear door trim panel
•
Remove rear door handle
Release nuts (1 and 2).
Remove retaining plate from door trim panel (4).
Installation:
Retaining plate must be positioned over pin (3).
Important!
Only drill down to door trim panel area (2) so as not to
damage the contact surface.
Drill out welding spots (1) on door trim panel (2) with 8 mm dia.
welding spot drill bit.
Release nut (3) and remove armrest.
Note:
Armrest is welded to door trim panel only on initial installation.
If necessary, release nuts (3) instead of welding spots (1).
RA Removing and installing/replacing armrest on rear left or right door trim panel
BMW AG - TIS
06.02.2013 02:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -