5 Series E60 523Li (N52K) SAL
61 31 334
Removing and installing/replacing grip trim
for gear selector switch
Special tools required:
•
00 9 322
Lever off side section (1) with special tool 00 9 322 from gear
selector switch (2) and remove.
Installation:
Position side section (1) on metal pins of gear selector
switch (2) and uniformly press down firmly and without leaving a
gap.
Lever off front shell (1) with special tool 00 9 322 from gear
selector switch (2) and remove.
Press P button (3) and remove front shell (1) starting from top.
Installation:
Insert front shell (1) at bottom in retaining ring (4). Uniformly
press front shell (1) upwards onto metal pins of gear selector
switch (2) firmly and without leaving a gap.
Lever off P button (1) with special tool 00 9 322 from gear
selector switch (2) and uniformly remove.
Installation:
After installing front shell, insert P button (1) into upper opening
on gear selector switch and uniformly press in until it engages.
RA Removing and installing/replacing grip trim for gear selector switch
BMW AG - TIS
08.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -