5 Series E60 525d (M57TU) SAL
Remove heat shields (1) and (2).
Release screws (1).
Tightening torque, 24 00 1AZ.
Unscrew nuts (2).
Remove exhaust system suspension (3).
Grip clamping sleeve (1).
Slacken nut (2).
Detach retainer (3) towards bottom using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever
Supporting transmission:
Support with special tools 24 5 306 , 24 5 301 and 00 2 030 .
Set up special tool 24 5 306 :
-
All supports to "B".
-
Supports 3 and 4 are at rear of transmission.
-
Support lettering points forwards.
RA Removing and installing automatic transmission (6HP26Z) M57TU
BMW AG - TIS
11.02.2013 14:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
