5 Series E60 525i (N52) SAL
Detaching cover and padding:
•
If necessary, mark retainer positions
•
Release all retainers in marked area
•
Remove cover from padding.
•
Remove remaining retainers from cover and padding
Installation:
Insert new retainers with special tool 52 0 050 . In so doing,
enclose wire in padding and trim wire of cover.
Replacing cover:
•
Pull all trim wires out of cover
•
If necessary, cut pockets in new cover for trim wires
•
Push trim wires into cover pockets
RA Replacing backrest cover for right rear seat (through-loading system)
BMW AG - TIS
15.02.2013 23:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -