5 Series E60 525i (N52) SAL
2
Check-Control messages
3
Test functions (= aids when troubleshooting without BMW diagnosis system)
4
Navigation instructions
Operation
The head-up display is controlled using the following control elements:
-
Button for switching head-up display on and off
-
Dimmer for instrument lighting
-
Controller for selecting brightness of head-up display in Central Information Display (CID)
> E70
Controller and CID for adjusting the image orientation of the virtual image
Preconditions for activation
The conditions required to switch the head-up display on are:
-
Terminal 15 switched on
-
Button for switching head-up display on and off switched on
Notes for service staff
Service staff should note the following points:
-
General information: [more ...]
-
Diagnosis: [more ...]
-
Encoding/programming: ---
-
Car and Key Memory: [more ...]
> E70: Nearly all Car and Key Memory functions are programmed inside the vehicle itself. (please refer to the
"Personal profile" section in the Owner's Handbook: individual settings for up to 3 remote controls via the display
in the instrument cluster or via the Central Information Display.)
National versions
Left-hand drive and right-hand drive vehicles each have different head-up displays. The constructions mirror each
other nearly identically.
Subject to change.
SBT Head-up display E60, E61, E63, E64, E70
BMW AG - TIS
16.02.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -